Journal

Dimmable LED Ceiling Lights: How to Choose Dimmer, Lumens and Socket

Integrated LED or E27, triac or remote control, how many lumens per square foot: how to find a dimmable LED ceiling light that doesn't flicker.

By the DecoHarmonie team11 min read

FENZE flat alabaster ceiling light with brass rim glowing in the evening in a bedroom

Running dimmable LED ceiling lights only works when the light and the dimmer are compatible: with integrated LED, the light must be explicitly listed as dimmable, for example as “triac dimmable”; with a socket such as E26, E12 or G9, you need a dimmable bulb. For LED, a trailing-edge (reverse-phase) dimmer with a low minimum load is usually the right choice. For general lighting, plan about 100 to 150 lumens per square meter (9 to 14 lumens per square foot) in the living room and 250 to 300 (23 to 28 per square foot) in the kitchen.

What exactly does “dimmable LED ceiling light” mean?

Dimmable means the brightness can be lowered steplessly or in steps without the LED flickering, humming or switching off. Whether that works isn’t decided by the LED itself, but by its electronics, the so-called driver. An LED ceiling light without a dimming rating can flicker on a dimmer or be damaged.

With LED Ceiling Lights, you’ll come across three variants:

  • Dimmable with a wall dimmer: the light responds to a dimmer in the wall box. Typical rating: “triac dimmable” or “dimmable with trailing edge.”
  • Dimmable by remote control or app: the dimmer is inside the light. The wall keeps a regular switch, which stays on permanently.
  • In steps via the light switch: switching on and off several times cycles through brightness or color temperature levels. No dimmer is needed.

What the light can do is always stated in the product description. If the word “dimmable” is missing, assume it isn’t.

Integrated LED or socket: which is better for dimming?

In a light with integrated LED, the light source and driver are built in. That allows very flat designs, often only 5 to 7 cm (2 to 3 in) deep, and an evenly glowing surface with no visible points of light. Many models have a lifespan of around 50,000 hours. But it’s only dimmable if the manufacturer built in the right driver. That can’t be retrofitted.

With a light that has a socket (E26, E12, G9, GU10), you choose the bulb yourself. It becomes dimmable as soon as you fit an LED bulb marked “dimmable.” Later you can change the color temperature, use a stronger bulb or simply replace a broken one. In return, the light is usually a bit deeper.

CriterionIntegrated LEDSocket (E26, E12, G9, GU10)
Depthvery flat possible (from approx. 2.5 cm / 1 in)usually deeper, depending on the bulb
Dimmable?only in a version listed as dimmablewith a dimmable bulb and a compatible dimmer
Change the color temperatureonly if switchable or chosen when orderingany time with a new bulb
Light patterneven surface, no points of lightdepends on shade and bulb
If it failsreplace the module or the light, depending on the modelreplace the bulb

For low ceilings and a calm, flat light pattern, integrated LED is the better choice. If you want to stay flexible, choose a socket.

Which dimmable LED ceiling lights come with integrated LED?

With several alabaster models, you choose dimmability directly in the version you order. FENZE is a flat alabaster disc in a metal ring, only 5 cm (2 in) deep, 30, 40 or 50 cm (12, 16 or 20 in) across, in gold or black. BILPI sets the stone disc on a brass base, 6.6 cm (2.6 in) deep, from 20 to 50 cm (8 to 20 in) across. The small bowl CIBI measures 20 cm (8 in) across and 10 cm (4 in) deep and suits a hallway or entryway. All three glow warm white at 3000 K and come in a “triac dimmable” version. The dimmer itself is not included.

BATRAZ sets a mosaic of alabaster tiles in a brass frame, 5 cm (2 in) deep and 40, 50 or 60 cm (16, 20 or 24 in) across. Besides three fixed color temperatures, there’s a separate dimmable version.

You’ll find more models in the Alabaster Ceiling Lights collection. How alabaster diffuses light and why it’s so well suited to dimming is explained in our guide to Travertine, Alabaster and Marble Lamps.

Which dimmer works with an LED ceiling light?

Most wall dimmers are phase-cut dimmers. They cut off part of the line voltage and so make the light dimmer. The label “triac dimmable” on a light means it’s designed for this type of dimmer.

Dimmer typeHow it worksSuitable for LED?
Leading edge / forward phase (often called triac)cuts off the start of each half-waveonly with LED lights rated for it; check the minimum load
Trailing edge / reverse phasecuts off the end of each half-wave, quieterusually the first choice for LED
Universal dimmer (LED universal dimmer)detects the load and chooses the method itselfyes, if marked as LED-compatible
Wireless, app, remote controlcontrol sits in the light or bulbyes, the wall switch stays on permanently
Old rotary dimmer for incandescent bulbsoften a high minimum load (e.g. 40–60 W)frequent flickering, better to replace

The most common cause of flickering is the minimum load. An 18 W LED light won’t run cleanly on a dimmer that requires at least 40 W. So look for a dimmer with a low minimum load for LED, listed in its spec sheet. Watch the maximum load too: many LED dimmers handle far fewer LED watts than incandescent watts.

LED ceiling light with remote control, or stepped via the switch?

If there’s no dimmer in the wall, or you don’t want one installed, there are two easy ways. An LED ceiling light with a remote control dims inside the light itself. JANNE, for example, combines a ring in a walnut look with ribbed glass, is 10 cm (4 in) deep and 33, 40 or 50 cm (13, 16 or 20 in) across. According to the specs, it dims with the included remote control, so in the bedroom you can dim it right from bed.

The second solution switches the color temperature instead of the brightness. HILDE is an LED panel only 2.4 cm (1 in) deep, 23, 30 or 40 cm (9, 12 or 16 in) across. With the wall switch, you change between 2800 K, 4000 K and 5000 K. IDUN, with a wood-colored grooved rim and 7 cm (3 in) deep, also switches between three color temperatures. According to their descriptions, neither is dimmable. But warmer light in the evening has a similarly calming effect.

Which color temperature suits what is explained in detail in our guide How to Choose Color Temperature, Kelvin and Lumens.

How do you dim a ceiling light with an E26, E12 or G9 socket?

With lights that have a socket, the bulb is what counts. Only LED bulbs marked “dimmable” may go on a dimmer. If you mix dimmable and non-dimmable bulbs in one light, the non-dimmable ones flicker or fail sooner. So always use identical bulbs of the same type in one light.

Our natural stone lights with sockets are explicitly dimmable with a dimmable bulb and a compatible dimmer. BORA carries three swiveling travertine spotlights on a round wooden base 30 cm (12 in) across, fitted with 3 × E26. That way you can aim one spot at a picture, one at the shelf and one at the doorway. SIRA lines up two or three satin glass globes under a travertine bowl, 27 or 40 cm (11 or 16 in) long, with E26. JUNO, 16 cm (6 in) across and 15 cm (6 in) high, is a small travertine cone with an opal glass globe and a G9 socket. The alabaster drum DESA measures 40 or 50 cm (16 or 20 in) across and has E12 sockets.

All the dimmable models, with integrated LED or a socket, are in the Dimmable Ceiling Lights collection.

How many lumens does an LED ceiling light need per square foot?

Lumens (lm) describe how much light a bulb gives off. With LED, watts say almost nothing about brightness. For planning, multiply the floor area by a guideline value per square meter (or square foot). The values apply to general lighting with a ceiling height of around 2.50 m (8 ft 2 in) and light-colored walls.

RoomGeneral lighting guidelineExample
Living room100–150 lm/m² (9–14 lm/sq ft)20 m² (215 sq ft) → 2,000–3,000 lm
Bedroom100–150 lm/m² (9–14 lm/sq ft)14 m² (150 sq ft) → 1,400–2,100 lm
Hallway, entryway100–150 lm/m² (9–14 lm/sq ft)8 m² (86 sq ft) → 800–1,200 lm
Dining room150–250 lm/m² (14–23 lm/sq ft)15 m² (160 sq ft) → 2,250–3,750 lm
Kitchen250–300 lm/m² (23–28 lm/sq ft)10 m² (108 sq ft) → 2,500–3,000 lm
Home office300–500 lm/m² (28–46 lm/sq ft)10 m² (108 sq ft) → 3,000–5,000 lm

Dark walls, wooden ceilings and ceilings above 2.80 m (9 ft 2 in) swallow light. Plan about 20 to 30% more there. With a dimmable light, you can safely go to the upper end, because you can always turn it down, but never brighter.

Some of our LED ceiling lights state their light output directly. NADIA, with a travertine frame and 7 cm (3 in) deep, delivers 1,980 to 5,280 lm depending on size (30, 43 or 55 cm / 12, 17 or 22 in across). By the numbers, the largest version lights a living room of 35 m² (375 sq ft) and more. JILO, with a wood-look frame, gives 1,800 lm (18 W) to 3,600 lm (36 W), warm white at 3000 K. Its LED module is replaceable. Neither is listed as dimmable; both work as bright general lighting that you complement with dimmable floor lamps or wall sconces. ZELIA is ultra-flat at 5.5 cm (2 in) and frames the light panel with travertine, 38, 48 or 58 cm (15, 19 or 23 in) across.

Which dimmable ceiling light for the living room, bedroom and hallway?

In the living room, dimming pays off most: bright for tidying up, dimmed for watching TV. Choose a large, flat light with enough lumens, such as FENZE at 50 cm (20 in) or BATRAZ at 60 cm (24 in) and 48 W. Measurements and spacing for the living room ceiling are in our guide Living Room Ceiling Lights: Size and Brightness.

In the bedroom, the light should be warm and low in the evening. A remote control like JANNE’s saves you the walk to the switch. More in our guide Bedroom Lighting.

In the hallway, a small light like CIBI or BILPI at 20 to 30 cm (8 to 12 in) is often enough. Dimmed, it serves as an orientation light at night. Suitable flush models are in the Hallway Ceiling Lights collection. Stairs have their own rules; see Stairway Lighting.

Ceiling Light ZALO, travertine cube – travertine, product photoCollection · 13 designsDimmable Ceiling LightsView all 13 designs

What mistakes happen when dimming LED ceiling lights?

  • A non-dimmable light on a dimmer: flickering, humming and a shorter lifespan follow. If in doubt, use a regular switch.
  • An old incandescent dimmer: the minimum load is too high, and the LED flickers at the low end of the range or switches off entirely.
  • Too few lumens: a dimmed light can never get brighter than its maximum. Plan 20% in reserve.
  • Cool white in living spaces: dimmed 6000 K light looks gray and dreary. For living spaces, 2700 to 3000 K is more pleasant.
  • Remote control plus wall dimmer: a light with its own dimmer belongs on a regular switch, not on a dimmer as well.

Frequently asked questions

Can you dim any LED ceiling light?

No. An LED ceiling light with integrated LED is only dimmable if the manufacturer explicitly lists it as such, for example as “triac dimmable.” For lights with a socket, you need a dimmable LED bulb. If the description says nothing about it, treat the light as not dimmable.

What does triac dimmable mean?

Triac dimmable means the light works with a phase-cut dimmer in the wall box, the common type of wall dimmer. The dimmer itself is usually not included. Make sure it’s suitable for LED and has a low minimum load.

Why does my dimmable LED ceiling light flicker?

Usually the dimmer doesn’t match: its minimum load is higher than the LED’s wattage, or it’s designed for incandescent bulbs. An LED-compatible trailing-edge or universal dimmer solves the problem in most cases. If the light also flickers without a dimmer, have the wiring checked.

How many lumens does a living room need?

For general lighting in the living room, plan on about 100 to 150 lumens per square meter (9 to 14 lumens per square foot). A 20 m² (215 sq ft) room therefore needs around 2,000 to 3,000 lm. With dark walls or high ceilings, plan 20 to 30% more.

Is an LED ceiling light with a remote better than a wall dimmer?

A remote control needs no changes at the wall and is handy in the bedroom. A wall dimmer, on the other hand, is always in the same place and can’t get lost. Don’t combine both on the same light.

Can I dim a ceiling light with an E26 socket?

Yes, if the LED bulb you use is marked dimmable and an LED-compatible dimmer is installed. In a multi-light fixture, always use identical bulbs. Whether the light itself is approved for dimming is stated in the product description.

More guides