Journal

Stairway Lighting: How to Plan Wall Sconces, Height and Spacing

How high, how many, which color temperature: how to light stairs and stairwells safely and without glare, with wall sconces, landing lights and pendants.

By the DecoHarmonie team9 min read

HAKON oak wall sconce glowing in the evening above a wooden bench in a hallway with a bookshelf

Good stairway lighting makes every step edge visible without glare. The best way is to mount wall sconces 180 to 200 cm (71 to 79 in) above the front edge of the step, every 2 to 3 m (6.5 to 10 ft) along the stairs, with one light at the start and one at the end of the flight. Add warm white light at 2700 to 3000 K, a switch at the top and bottom and a light with an opal or stone shade, so you don’t look into a bare bulb as you climb.

What matters in stairway lighting?

Stairs are the place in the house where poor light becomes truly dangerous. Good stairway lighting does three jobs:

  • Show the step edges: the light should fall so that the front edge of each step forms a clear light-dark contrast with the next.
  • No glare: going up, you look up; going down, you look down. In both directions, no bulb should be directly in your field of view.
  • No shadow of your own: if the light only comes from behind, you cast your own shadow on the steps as you go down.

For brightness, about 100 to 150 lux on the steps is a common guideline for stairs in a home: much more than in a bedroom, but less than in a kitchen. More important than the sheer amount is that the light is spread evenly over all the steps.

Stairway wall sconces: how high and how far apart?

Stairway wall sconces are the best solution for most stairs. They sit to the side, light the steps at an angle from above, and can be installed and maintained above the stairwell without a ladder. Always measure vertically from the front edge of the step below the light to the center of the light.

SituationMounting height (from step front edge)Spacing and position
Straight staircase in a single-family home180–200 cm (71–79 in)every 2–3 m (6.5–10 ft), first light above the first steps
Quarter-turn or half-turn staircase180–200 cm (71–79 in)always one light at the turn, where the steps are narrow
Landing or mid-landing170–190 cm (67–75 in) from the landing floorcentered on the landing wall or as a ceiling light
Low staircase, attic, basement170–180 cm (67–71 in)flat light, projection ideally under 12 cm (5 in)
Step lights as an additionapprox. 20–40 cm (8–16 in) above the stepevery 2–3 steps, light grazing the tread
Stairwell over several floors180–200 cm (71–79 in) per flight2–3 wall sconces per flight, one at each landing

A typical straight staircase with 14 to 16 steps has a run of about 3.5 to 4 m (11.5 to 13 ft). Two wall sconces are usually enough for that, three for wide or dark stairs. If you mount them on the same wall as the handrail, make sure your hand doesn’t block the beam. These values match the mounting heights in our guide Wall Sconces: Height and Spacing.

Which stairway light works on the wall?

Ideal are lights that hide the bulb and don’t stick out much. The alabaster half-bowl BOLGO, 25 cm (10 in) across and 13.5 cm (5 in) high, diffuses its light softly and without glare and also throws light up onto the wall. Several bowls at the same height accompany a flight like a calm line of light. BALSARI is an alabaster cylinder, 30 cm (12 in) tall and 10 cm (4 in) across, with a total depth of 15 cm (6 in) and an E12 socket. According to its description, it sets even points of light in the stairwell, alone or in a row.

If you prefer glass, go for JOVID in ribbed glass: single at 27 cm (11 in), double at 48 cm (19 in) tall, each 9 cm (3.5 in) wide, LED bulb included. The wooden light SARO with an opal glass shade is 25 cm (10 in) tall, 10 cm (4 in) wide and 12 cm (5 in) deep, and its shallow depth means it also fits narrow stairs. With the E26 socket, you choose the color temperature yourself.

You’ll find more models in the Hallway and Stairway Wall Sconces collection. Alabaster and opal glass are especially rewarding here, because they don’t glare even when seen from below. More on the stone is in our guide Travertine, Alabaster and Marble Lamps.

How do you light a stairway indirectly?

With indirect light, the fixture throws light onto the wall, and the wall passes it softly on to the steps. It doesn’t glare and feels calm, but on its own it’s rarely enough for safe walking. So combine it with a second light source, or use it as a night and orientation light.

The wooden light HAKON throws a warm strip of light sideways onto the wall, warm white 2700 to 3500 K, in 22, 32 or 52 cm (9, 13 or 20 in) heights. The body rotates, so you decide which direction the light falls. The travertine disc HALO measures just 10 × 10 cm (4 × 4 in) and sends a grazing light up or down along the wall. Mounted at knee height, it becomes a subtle step light. KURO, in metal and opal acrylic, is 12.5 cm (5 in) wide and 20 cm (8 in) tall and can be mounted on the wall or ceiling, in white or yellow.

How uplights and downlights work in living spaces is explained in our guide Indirect Lighting in the Living Room.

Open stairs with a gallery or a stairwell over two floors can take a larger piece that works from both levels. Two rules apply here. First: under the pendant, leave at least 2 m (6 ft 7 in) of headroom above every step and landing. Second: the light hangs in the open space, not over the walking line, so you don’t brush it with furniture or moving boxes.

According to its description, the cascade light JARI, in the Symphonie edition with 31 shades, is designed for high ceilings, foyers and stairwells: 126 cm (50 in) across and 150 cm (59 in) high, in eleven colors. The small alabaster globe BOURBON (10, 12 or 15 cm (5.9 in) / 4, 5 or 6 in across, cord adjustable up to 200 cm (78.7 in) / 79 in), hung at several heights, forms a cascade of stone globes. The ribbed glass pendant HARDYO with three modules is 105 cm (41 in) tall and emphasizes the height of the space. For a tall wall in the stairwell, the 120 cm (47 in) version of the wall sconce LIIS stretches the vertical. Note: according to the spec diagram, its integrated LED is neutral white.

Depending on the model, our pendant lights have cords of 150 to 200 cm (59 to 79 in). Before buying, check whether that length reaches from the ceiling to the height you want. You’ll find all the models in the Pendant Lights collection.

Which ceiling light for the landing?

On the landing and at the top of the stairs, a compact ceiling light that sits close to the ceiling is often enough. A shade that completely hides the bulb is essential, because from the stairs you look up into it.

JOLA is an opal white glass globe 15 or 20 cm (6 or 8 in) across on a light wood base, with an E26 socket. According to its description, it gives friendly general light in hallways and stairwells. BILPI sets an alabaster disc 20 to 50 cm (8 to 20 in) across on a brass base, only 6.6 cm (2.6 in) deep, and is available in a triac-dimmable version. If the ceiling above the landing is very low, the LED panel HILDE, 2.4 cm (1 in) deep, is a good fit.

Ceiling Light LONN, ribbed glass flower – amber ribbed glass, brass-tone bulb holder, product photoCollection · 55 designsHallway Ceiling LightsView all 55 designs

How to light long, narrow hallways that lead off the stairs is covered in our guide Hallway Light Fixtures.

Which color temperature and switching for the stairs?

In the stairway, warm white light at 2700 to 3000 K works best. It feels welcoming and glares less than cool light when you get up at night. Look for a color rendering of at least Ra 80, so the stair covering and edges are easy to tell apart. All the values are explained in our guide Color Temperature, Kelvin and Lumens.

For switching:

  • Switch at the top and bottom: 3-way switches, with one switch at the start and one at the end of the stairs, are a must for comfort. With more than two floors, add a 4-way switch.
  • Motion sensor: it switches the light on automatically as soon as you step onto the stairs. Handy when your hands are full. The bulbs must be suited to frequent switching, which is generally the case with LED.
  • Night light: a dimmed or indirect light that glows faintly at night replaces the harsh main light on the way to the bathroom or kitchen. How to dim lights is explained in our guide Dimmable LED Ceiling Lights.

What are common stairway lighting mistakes?

  • Only one ceiling light at the top: going down, your own shadow falls right on the steps in front of you.
  • Clear glass with a visible bulb: from below, you look straight into the bulb. Opal glass, alabaster or indirect light work better.
  • Lights that stick out too far: on narrow stairs, you bump them with a shoulder or whatever you’re carrying. Keep the projection under 12 cm (5 in) in tight spots.
  • First and last steps in the dark: that’s exactly where many missteps happen. Both must be well lit.
  • Cool white at night: 6000 K glares harshly after you wake up. Stick to warm white.

Frequently asked questions

How high should stairway wall sconces be mounted?

Stairway wall sconces usually sit 180 to 200 cm (71 to 79 in) above the front edge of the step below, measured to the center of the light. On landings, 170 to 190 cm (67 to 75 in) from the landing floor is enough. That way the light doesn’t glare and is safely above head height.

How many lights does a staircase need?

For a straight staircase with 14 to 16 steps, two wall sconces 2 to 3 m (6.5 to 10 ft) apart are usually enough, three for wide or dark stairs. Add one light at each landing. What matters is that the first and last steps are well lit.

What is the best light for a stairway?

Wall sconces that hide the bulb are best, for example in alabaster or opal glass, combined with a compact ceiling light on the landing. They light the steps at an angle from above and don’t glare even from below. With a gallery, a large pendant in the stairwell can be added.

What color temperature is right for stairs?

Warm white at 2700 to 3000 kelvin is ideal for stairs in a home. It feels friendly and glares less at night than cool light. Color rendering should be at least Ra 80, so edges are easy to see.

How low can a pendant light hang over the stairs?

Under a pendant in the stairwell, leave at least 2 m (6 ft 7 in) of headroom above every step and landing. If the light hangs in the open space beside the walking line, it can reach lower. Check the cord length first; on our models it’s usually 150 to 200 cm (59 to 79 in).

Does a motion sensor make sense in a stairway?

Yes, especially if you often walk with your hands full or have kids in the house. The light comes on automatically when you step onto the stairs and goes off again after a set time. LED bulbs generally handle frequent switching well.

More guides