Journal

Color Temperature Chart: 2700K, 3000K or 4000K? Kelvin for Every Room

Warm white, neutral white or cool white: which color temperature in kelvin suits which room, how many lumens per square foot you need and what CRI tells you.

By the DecoHarmonie team10 min read

MILATRE ceiling light with wooden disc and alabaster glowing in the evening above an armchair in front of a bookshelf

Color temperature is measured in kelvin (K): the lower the value, the warmer and more yellow the light looks, as any color temperature chart shows. For living, dining and bedrooms, 2700 to 3000 K (warm white) works well; for the kitchen, bathroom and workspace, 3000 to 4000 K (neutral white); values from about 5300 K (daylight white) belong in a workshop or basement. You set the brightness separately through lumens: for general lighting, about 100 to 150 lm per square meter (9 to 14 lm per square foot) in the living room.

What does color temperature in kelvin mean?

Kelvin describes the color temperature of a light source. A candle flame is about 1800 to 2000 K, a classic incandescent bulb around 2700 K, midday sunlight about 5500 to 6500 K. That sounds paradoxical, because the “cooler” color has the higher kelvin value. Just remember: low kelvin = warm and cozy, high kelvin = cool and alert.

A common classification, used on LED packaging in the EU, splits light into three groups:

  • Warm white: below 3300 K, typical values 2700 and 3000 K.
  • Neutral white: 3300 to 5300 K, typical value 4000 K.
  • Daylight white or cool white: above 5300 K, typical values 5000 to 6500 K.

Color temperature says nothing about brightness. A 3000 K light can be just as bright as one at 6000 K. Cool white light only looks brighter because it contains more blue.

Color temperature chart: which kelvin for which room?

The following chart sums up common guidelines. The lumen values apply to general lighting with a ceiling height of around 2.50 m (8 ft 2 in) and light-colored walls. With dark walls or high ceilings, plan 20 to 30% more.

RoomColor temperatureGeneral lighting (lumens per m² / sq ft)Note
Living room2700–3000 K100–150 lm/m² (9–14 lm/sq ft)brighter reading light where needed
Bedroom2700 K, warmer in the evening100–150 lm/m² (9–14 lm/sq ft)dimmable is ideal
Dining room2700–3000 K150–250 lm/m² (14–23 lm/sq ft)warm light makes food look appetizing
Kitchen3000 K, up to 4000 K at the counter250–300 lm/m² (23–28 lm/sq ft)CRI 90+ at the work surface
Bathroom3000–4000 K200–300 lm/m² (19–28 lm/sq ft)mirror light from the front and sides
Home office, desk4000 K by day, 3000 K in the evening300–500 lm/m² (28–46 lm/sq ft)around 500 lux on the desk
Hallway, stairway2700–3000 K100–150 lm/m² (9–14 lm/sq ft)even, without glare
Kids’ room2700–3000 K150–250 lm/m² (14–23 lm/sq ft)warm and dimmed in the evening

Rule of thumb: where you relax, choose warm white. Where you need to see clearly, it can be more neutral. Within one room, all the lights should ideally share the same color temperature, otherwise the ceiling looks bluish and the floor lamp yellow.

Warm white: 2700K or 3000K?

2700 kelvin matches the light of an incandescent bulb. It’s the warmest common LED white and makes wood, linen and skin look especially soft. Ideal for the bedroom, for floor lamps and for every light that’s on in the evening.

3000 kelvin is also warm white, but a touch crisper. White walls look less yellow, and natural stone such as alabaster and travertine shows its veining more clearly. For living rooms, dining rooms and kitchens, 3000 K is the most common compromise. Many of our lights with integrated LED glow at exactly this value.

MILATRE hangs a wooden disc 35 cm (14 in) across over a diffuser with an alabaster look and glows warm white at 3000 K. The spotlight rail PORIAT, in solid wood, carries two to five swiveling spots, 42 to 120 cm (17 to 47 in) long, also at 3000 K. The wooden light HAKON throws a narrow strip of light on the wall, according to its description in warm white between 2700 and 3500 K. The travertine wall sconce SOLRA also states its light output: 640 to 790 lm at 9.1 W, warm white.

When does 4000 kelvin (neutral white) make sense?

4000 kelvin feels matter-of-fact and clear. That’s good when you need to concentrate or see colors accurately: at the kitchen counter, at the desk during the day, in the laundry room. In the living room, though, neutral white quickly feels like an office in the evening.

Some lights let you choose the color temperature when ordering. The alabaster mosaic light BATRAZ, 5 cm (2 in) deep and 40 to 60 cm (16 to 24 in) across, comes in 3000, 4000 or 6000 K. So does the ribbed glass pendant HARDYO, 12 cm (5 in) across with one to three modules. TSARUK, a square alabaster block from 30 × 30 to 60 × 60 cm (12 × 12 to 24 × 24 in), comes in 3000 or 6000 K. The small alabaster globe GOIRTA, 12 cm (5 in) across, comes with a replaceable G9 bulb in 3000, 4000 or 6000 K.

For natural stone, we almost always recommend 3000 K: cool light makes the honey-colored veins look gray. With these models, neutral white is mainly worth it in the kitchen or a work area.

Warm white or cool white: which is better?

For living spaces, warm white is almost always the better choice. Cool white at 5000 to 6500 K recalls midday daylight. That can help during the day in windowless workrooms; in the evening, it feels cold and uninviting. Many people also find cool light stimulating in the evening, because it resembles daylight.

The flexible solution is lights with switchable color temperature. The flat LED panel HILDE, only 2.4 cm (1 in) deep, switches via the wall switch between 2800 K, 4000 K and 5000 K. IDUN, with a wood-colored grooved rim, switches between three color temperatures, from warm evening light to bright task light. The cordless table lamp LIRI offers 3000, 4100 and 6000 K and a touch dimmer.

More cordless models with selectable color temperature are in the Cordless Table Lamps collection.

What is CRI (color rendering index)?

The color rendering index, CRI, often written as Ra, shows how natural colors look under a light source. The maximum is 100, which equals sunlight or an incandescent bulb. It’s independent of color temperature: even a warm white LED bulb can render colors poorly.

CRI / RaAssessmentSuitable for
below 80colors look washed out, skin looks palebasement, storage room
80–89common standard for indoor roomshallway, living room, bedroom
90 and abovevery natural colorskitchen, bathroom, closet, artwork, desk

You’ll find the value on the bulb’s packaging, usually as “Ra > 80” or “CRI 90.” With lights that have a socket, you therefore choose it yourself. An example from our collection: the cordless table lamp LIRI states a color rendering of CRI > 95.

How many lumens per square foot do you need?

Lumens (lm) measure the amount of light a lamp gives off. With LED, watts say little about brightness. For comparison: an old 60 W incandescent bulb equals about 700 to 800 lm, a 100 W incandescent about 1,300 to 1,500 lm.

Here’s the math: floor area × guideline value from the chart above. A 20 m² (215 sq ft) living room therefore needs around 2,000 to 3,000 lm for general lighting. That amount doesn’t have to come from a single ceiling light. Spread across a ceiling light, a floor lamp and two wall sconces, the room looks more even and cozier. How to plan light in layers is covered in our guide Indirect Lighting in the Living Room.

Some of our LED lights state their light output directly. The travertine ceiling light NADIA delivers 1,980 to 5,280 lm depending on size (30, 43 or 55 cm (21.7 in) / 12, 17 or 22 in across). JILO, with a wood-look frame, gives 1,800 to 3,600 lm at 3000 K. The flat pendant MAKARON puts out 1,320 lm (25 cm (9.8 in) / 10 in across) or 2,640 lm (40 cm (15.7 in) / 16 in across), warm white at 3000 K. Two or three of them are enough over a kitchen island.

Whether and how to dim such lights is explained in our guide Dimmable LED Ceiling Lights.

How do you read color temperature and lumens on the packaging?

Every LED bulb lists the key values in a set format. Five details are enough to compare two bulbs reliably:

  1. Light output in lumens (lm): the brightness. For a typical table or floor lamp, 400 to 800 lm is enough; for a living room ceiling light, often 2,000 lm and more.
  2. Color temperature in kelvin (K): the light color; for living spaces, 2700 or 3000 K.
  3. Color rendering (Ra or CRI): at least 80, better 90.
  4. Dimmable or not: usually shown as a dimmer symbol, crossed out or not.
  5. Base: E26, E12, G9 or GU10. It has to match the light’s socket.

For lights with built-in LED, you’ll find these details in the product description. If it only says “warm white” without a number, the value is generally between 2700 and 3300 K.

Which color temperature for natural stone, glass and wood?

Materials react differently to color temperature. Alabaster glows honey and ivory at 2700 to 3000 K, and turns whiter and cooler at 4000 K. Travertine and wood look richer under warm white. Opal glass is neutral and passes on the bulb’s color temperature almost unchanged. Amber and smoked glass tint the light warmer themselves or soften it. That’s why some of our Alabaster Wall Sconces with integrated LED glow at a fixed 3000 K, such as AMPE, which also comes in a triac-dimmable version. You’ll find more on glass as a shade material in our guide Glass Pendant Lights.

Ceiling Light ROGN, small round LED light, black or brass-tone – brushed brass tone, product photoCollection · 25 designsLED Ceiling LightsView all 25 designs

What mistakes happen when choosing color temperature?

  • Different kelvin values in the same room: 2700 K on the floor lamp and 4000 K on the ceiling look restless. Stick to one value within a room.
  • Cool white in the living room: in the evening, it makes the room feel cold and uninviting. Choose 2700 or 3000 K instead.
  • Forgetting lumens: the right color temperature won’t help if the room is too dark. Work out the lumens first, then choose the color.
  • Ignoring CRI: a cheap bulb with Ra below 80 makes wood and skin look pale, no matter how warm it is.
  • Buying by watts only: with LED, compare lumens, not watts.

At the desk, different rules apply; see Desk Lamps and Light for Your Workspace. How warm light calms the bedroom is shown in our guide Bedroom Lighting.

Frequently asked questions

How many kelvin is warm white?

Warm white covers color temperatures below 3300 kelvin. Common LED values are 2700 K, which matches the light of an incandescent bulb, and 3000 K, which looks a little crisper. Both are a good choice for living spaces.

Is 3000 kelvin warm or cool?

3000 kelvin counts as warm white. It’s a touch cooler and crisper than 2700 K, but much warmer than neutral white at 4000 K. For living rooms, dining rooms and kitchens, it’s the most common value.

What color temperature is best for the living room?

For the living room, warm white at 2700 to 3000 K works best. It feels cozy and makes wood, fabrics and skin look natural. Neutral white at 4000 K is recommended for a work corner at most.

How many lumens per square foot do you need?

For general lighting, plan about 100 to 150 lumens per square meter (9 to 14 lumens per square foot) in living rooms, bedrooms and hallways. In the kitchen, 250 to 300 lm/m² (23 to 28 lm/sq ft) is typical, and at a workspace 300 to 500 lm/m² (28 to 46 lm/sq ft). Dark walls and high ceilings need 20 to 30% more.

What is a good CRI value?

For living spaces, a CRI or Ra of at least 80 is the usual standard. In the kitchen, bathroom, at the closet and at the desk, Ra 90 or more is worth it, because colors should look natural there. The maximum is 100.

Is 4000 kelvin too cool for the bedroom?

For the evening hours in the bedroom, 4000 K is usually too cool and too stimulating. 2700 K or a dimmable warm white light is better. 4000 K suits the kitchen, bathroom or workspace instead.

More guides